Sign in
Login Notification Text

S3 » Trouble Shooting

Category
All
Incorrect chemical concentration
Delivery from the outlet hose is not smooth
No chemical flow at outlet
No rinsing pressure
No suction of chemicals
Poor foam quality
Rinse pressure too low
Unstable chemical flow at outlet
Unstable pump/rinsing pressure
Choose category
Ball valve at the system's inlet is not open
Chemical pump station not started
In- or outlet valves are closed
Outlet hose is damaged
Too high air pressure to the injector
The chemical used is not a foam product
No compressed air to the system
Injector system is blocked by chemical residue
Chemical product is mixed with water
Non-original disinfection or foam nozzle fitted
Suction filter at the end of the suction hose is blocked by chemical residues
The used chemical product is not a foam product
Air pressure too low
Air valve not opened or compressor not started
Chemical product is mixed with water
Incorrect dosing
Supply station for boosting water pressure is not started
Function selector is not in the correct position
Too many users on the same supply station
Valve/gun at the end of the outlet hose not open
Insufficient water supply to the unit
Suction filter at the end of the suction hose is blocked
Empty chemical can
Hole in foam nozzle (white protector) or disinfection nozzle (yellow protector) is blocked by chemical residues
Leak on chemical inlet resulting in false air being sucked into the system
Dosing valve/chemical restictor or non return valve on the chemical inlet is blocked by chemical residues
Suction filter at the end of the suction hose is above fluid level in chemical can
Water pressure is too low
Function selector switch is not turned to "foam" or "disinfection"
The function selector switch is not turned to "foam"