Integrated lifting bracket: Mounting instructions

Your new System Cleaners cleaning system features an integrated lifting bracket, ensuring safety and preventing lifting accidents in the mounting process. Please follow the step-by-step instructions below.

*Note that this is not applicable for MS1-10 and MSC1-10

Start by drilling holes and mounting the wall bracket (bracket included along with screws and rawlplugs).

IMPORTANT: When fixing the equipment to the wall or floor rack, ALWAYS remember to install the safety screw at the bottom of the cabinet into the wall (1) or floor rack (2).

Your new System Cleaners unit is shipped laying on a pallet. To mount it on the wall bracket or a floor rack, use the integrated lifting bracket.

Secure an approved sling to the bracket. Note that the cabinet door MUST be open when starting to hoist the system. If not, the sling can damage the door.

Once the system is hoisted into upright position, a forklift can be used for the final steps of the installation.