MS5/MS7 » Maintenance

Flush the injector system

After each use the injector, the chemical valves and the suction hoses must be flushed with clean water

Weekly

Suction filter

at the end of the suction hose must be cleaned regularly for impurities

Weekly

Ball valves

The spindle nuts on all ball valves should be readjusted weekly

Weekly

Air pressure regulator

Expel condensed water by either shutting off the compressed air, or turning the knob for manual emptying

Monthly

Injector

The injector system must be disassembled monthly

Monthly

Low pressure valve

The nut on the low pressure valve must be adjusted

Monthly

Activator

The activator valve must be checked for leakages

Quarterly

Non-return valve - Inlet

Control non-return valve on water outlet

Yearly

Pressure switch

It is recommended to change the pressure switch once a year

Yearly

Rinsing hoses

It is recommended that the rinsing hoses is replaced after 12 months of use

Yearly

Water filter

The installed water filter at the water inlet located before the unit must be cleaned regularly

Quarterly

Couplings

It is recommended that all couplings be regularly cleaned and lubricated with grease in order to prevent leakages or dam...

Quarterly

Non-return valve - Satellite

Check the non-return valve in the built-in satellite.