S1 » Maintenance

The installed water filter at the water inlet located before the unit must be cleaned

at the end of the suction hose must be cleaned regularly for impurities

The spindle nuts on all ball valves should be readjusted weekly

The injector system must be disassembled monthly

The nut on the low pressure valve must be adjusted

It is recommended that all couplings be regularly cleaned and lubricated with grease in order to prevent leakages or dam...

It is recommended that the rinsing hoses is replaced after 12 months of use

Expel condensed water by either shutting off the compressed air, or turning the knob for manual emptying

Control non-return valve on water outlet

After each use the injector, the chemical valves and the suction hoses must be flushed with clean water