Injector water nozzle
The injector system must be disassembled monthly
- if nesessary it should be descaled in order to avoid blocking the injector
The water nozzle should be cleaned
In order to ensure that the injector system is not blocked by residual chemicals, we recommend rinsing it with clean water every month. There are, however, some chemical products which demand the injector system being rinsed more often. The frequency is also depending on the hardness of the water used.
Note! When you disassemble parts with stainless steel thread, always remember to lubricate before reassembling. Watch the video tutorial How to lubricate stainless steel thread